RX 450h/350/270 GYL/GGL/AGL 1#W 
FRONT HALF
SIDE STEP
REAR HALF 4本出し
REAR HALF
REAR PIECE MUFFLER
- << Back to TOP ｜
- CAR LINEUP >
- LEXUS >
- RX >
- 【HIGH-SPEC LINE】RX 450h/350/270 GYL/GGL/AGL 1#W < MC AFTER 2012.1- >
|
RX 450h/350/270 GYL/GGL/AGL 1#W | Name of products | EX-factory Price Trading Price |
tob | Term of Delivery |
Material |
|
■FRONT HALF SPOILER | ¥65,000 | G | A S K | FRP |
|
【FITTING SIZE】CENTER：110mmDOWN、SIDE：25mmDOWN 【KIT INCLUDES】Include Artisan Spirits BLACK LABEL Plate. 【REF.】※Exclusive design for OE normal style bumper ※Mesh Net (Color: Silver) included |
|||||
|---|---|---|---|---|---|
 |
■SIDE STEP（6P） | ¥90,000 | G | A S K | FRP |
|
【FITTING SIZE】FRONT：30mm DOWN、REAR：30mm DOWN 【REF.】※Covered on OEM Side Step |
|||||
 |
■REAR HALF SPOILER (For Dual exhaust Ends type at each side) | ¥60,000 | G | A S K | FRP |
|
【FITTING SIZE】50mm DOWN 【REF.】Recommend to install together with the Exhaust kit for designing especially in Aero Kit (Exhaust opening 300mm) ※Mesh Net (Silver Color) included ※For Installation, may require a little modification or to remove OE. Rear Under Cover. ※Exclusive to Z's Sports Dual Exhaust 4 Exhaust Ends (for 450h only) |
|||||
 |
■REAR HALF SPOILER | ¥60,000 | G | A S K | FRP |
|
【FITTING SIZE】50mm DOWN 【REF.】※Mesh Net (Silver Color) included ※For Installation, may require a little modification or to remove OE. Rear Under Cover. ※Required separately Lexus Genuine Parts for LS Late Production (Rear Bumper Extension RH No.52106-50040, LH No.52107-50040) |
|||||
| ■3P KIT（FRONT HALF / SIDE STEP / REAR HALF） | ¥205,000 | G | A S K | FRP | |
| ■4P KIT（FRONT HALF / SIDE STEP / REAR HALF / REAR GATE） | ¥240,000 | G | A S K | FRP | |
| ■5P KIT（FRONT HALF / SIDE STEP / REAR HALF / REAR GATE / OVER FENDER） | ¥340,000 | G | A S K | FRP | |
| ■COMPLETE KIT（FRONT HALF / SIDE STEP / REAR HALF / REAR GATE / OVER FENDER / Z's Sports Dual Exhaust 4 Exhaust Ends for 450h only)） | ¥495,000 | G | ASK | FRP | |
 |
■OVER FENDER KIT（10P） | ¥120,000 | G | A S K | FRP |
|
【FITTING SIZE】20mm WIDE 【REF.】※Exclusive Design for Artisan Spirits Aero kit, when install to OE bumper, may require the modification.。 ※Installed this item, Vehicle become 20mm wider than OE, please check your country’s local regulation ※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY（CO6347 BL1500-3K）, using carbon textile as twilled |
|||||
 |
■REAR GATE SPOILER | ¥48,000 | G | A S K | FRP |
|
【REF.】※Carbon Hybrid Type (CFRP+FRP) is also available. ※Include Logo Emblem. ※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY（CO6347 BL1500-3K）, using carbon textile as twilled ※In case of the vehicle under grass coating or similar paint coating on, sometimes user has to remove the surface of painting by compound for increasing the strength of bonding. |
|||||
  |
■REGISTRATION PLATE HOLDER | ¥24,000 | J | - | CFRP |
|
【REF.】※Include BLACK LABEL Plate. ※Impossible install with illuminated number plate. ※Please specify from Twill Weave or Plain Weave. ※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY（CO6347 BL1500-3K） |
|||||
 |
■NUMBER PLATE BOLT SET (Color: Silver) | ¥2,000 | H | - | SUS |
| ■NUMBER PLATE BOLT SET (Color: Matt Black) | ¥2,400 | H | - | SUS | |
|
【REF.】BOLT: M6 P1.0X25mm/Set with one Torx wrench |
|||||
 |
■Z's SPORTS- DUAL EXHAUST, 4 Exhaust End with Rear piece Muffler (exclusive for 450h) |
¥178,000 | I | ASK | SUS |
|
【REF.】※Approved Sound regulation during acceleration (Japanese Domestic Control)
※Approved Safety Standard in Japan. ※Exclusive for HIGH SPEC AERO KIT, Not suitable for OE Bumper ※Dual Exhaust End at R/L each side (120φ×80φ) ※Exclusive design for Aero Kit, highly recommend to install together □ Slide Function Exhaust Outlet may require additional 14,000Yen   |
|||||
 |
■Z's SPORTS- DUAL EXHAUST, 左右ディフューザータイプ with Rear piece Muffler (exclusive for 450h) | ¥130,000 | I | ASK | SUS |
|
【REF.】※Approved Sound regulation during acceleration (Japanese Domestic Control)
※Approved Safety Standard in Japan. ※LS後期純正部品（リアバンパーエクステンション RH NO:52106-50040 LH NO:52107-50040）は別売です。 |
|||||
 |
■PILLAR TRIM （STAINLESS MIRROR） | 8P ¥35,000 10P ¥40,000 |
G | ASK | SUS |
|
【REF.】8 pieces/10 pieces, with installation manual and double sided adhesive tape.
Not fit with the vehicle installed Door visor, (May require some modification) |
|||||
 |
■PILLAR TRIM （STAINLESS BLACK） | 8P ¥40,000 10P ¥45,000 |
G | ASK | SUS |
|
【REF.】8 pieces/10 pieces, with installation manual and double sided adhesive tape.
Not fit with the vehicle installed Door visor, (May require some modification) |
|||||
 |
■PILLAR TRIM （BLACK CARBON） | 8P ¥37,000 10P ¥42,000 |
G | ASK | CARBON |
|
【REF.】8 pieces/10 pieces, with installation manual and double sided adhesive tape.
Not fit with the vehicle installed Door visor, (May require some modification) |
|||||
 |
■FLOOR MAT（HIGH CLASS） | ¥45,000 | H | ASK | |
|
【COLOR】Black, Ivory
【REF.】Density: 1700g/m² pile Length: 17mm ※Approved inflammable regulation for Vehicle ※High Class products is set by multiple layer color |
|||||
|
■FLOOR MAT（MIDDLE CLASS） | ¥40,000 | H | ASK | |
|
【COLOR】Black, Gray, Ivory
【REF.】Density: 1400g/m² pile Length: 13mm ※Approved inflammable regulation for Vehicle |
|||||
|
■FLOOR MAT（REGULAR CLASS） | ¥30,000 | H | ASK | |
|
【COLOR】Black, Gray, Ivory
【REF.】Density: 740g/m² pile Length: 10mm ※Approved inflammable regulation for Vehicle |
|||||
FRP: White Gel Coat Finish, necessary to paint / CFRP:Wet Carbon Finish / ABS: Made by ABS Resins、necessary to paint / SUS: Stainless Steel（JIS Formula 304） / CHROME:Hard Adanized Chrome Plated Finish