IS-F DBA-USE20 < 2007.12- > |
- << Back to TOP |
- CAR LINEUP >
- LEXUS >
- IS-F >
- 【SPORTS LINE ARS】IS-F DBA-USE20 < 2007.12- >
IS-F DBA-USE20 < 2007.12- > |
Name of products | EX-factory Price Trading Price |
tob | Term of Delivery |
Material |
■FRONT BUMPER | ¥120,000 | FT | A S K | FRP | |
【FITTING SIZE】20mm DOWN 【REF.】※Include Number Plate Holder, FRP Fog Cover for 4 Fog Lamps and Mesh Net for Duct(Color: Silver) ※For Installation, may require a little modification or to remove OE. Break Duct and OE. Radiator Duct. ※OE. Optional Dis-Charge Fog Lamps & Daytime Running Lamp and Fender Lamp are impossible to install together with this Front Bumper. ※For avoiding 4 Fog Lamps light on at once, may use the 5 points relay, then able to light on separately each 2 lamps. ※The vehicle installed Clearance sonar, may require the modification. Reverse side of the Aero Parts, there are the Scratched mark, you may cut the holes for Sonar parts. |
|||||
---|---|---|---|---|---|
■SIDE STEP | ¥80,000 | FT | A S K | FRP | |
【FITTING SIZE】FRONT:10mm DOWN、REAR:15mm DOWN 【REF.】※Mesh Net(Silver Color ) included ※This item is designed to replace with Lexus OE. Side Step. ※Impossible to install with the Genuine optional Mug Guard |
|||||
■REAR BUMPER | ¥110,000 | FT | A S K | FRP | |
【FITTING SIZE】10mm DOWN 【REF.】※Mesh Net(Silver Color ) included ※Pre-Crash Safety system will not be functioned with this Bumper kit ※Impossible to install with the Genuine optional Mud Guard ※The vehicle installed Clearance sonar, may require the modification. Reverse side of the Aero Parts, there are the scratched mark, you may cut the holes for Sonar parts ※Necessary to transfer OE Muffler Cutter |
|||||
■3P KIT(FRONT BUMPER / SIDE STEP / REAR BUMPER / FRP FOG COVER) FOG LAMPS are sold separately | ¥295,000 | FT | A S K | FRP | |
■REAR ROOF SPOILER | ¥42,000 | FT | Out of production | FRP | |
【REF.】※In case of the vehicle under grass coating or similar paint coating, sometimes user has to remove the surface of painting by compound for increasing the strength of bonding. |
|||||
■REGISTRATION PLATE HOLDER | ¥24,000 | J | - | CFRP | |
【REF.】※Include BLACK LABEL Plate. ※Impossible install with illuminated number plate. ※Please specify from Twill Weave or Plain Weave. ※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once fitting . Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY(CO6347 BL1500-3K) |
|||||
■NUMBER PLATE BOLT SET (Color: Silver) | ¥2,000 | H | - | SUS | |
■NUMBER PLATE BOLT SET (Color: Matt Black) | ¥2,400 | H | - | SUS | |
【REF.】BOLT: M6 P1.0X25mm/Set with one Torx wrench |
|||||
■FOG LAMP (2 Lamps in 1 set) | ¥10,000 | G | ASK | ||
■5 POINTS SWITCHING RELAY (DC12V only) | ¥1,250 | F | ASK | ||
■FRONT PIPE (Without Canister) ※For Competition Use | ¥100,000 | HT | ASK | SUS | |
■FRONT PIPE (With Canister) ※Approved Safety Standard in Japan | ¥220,000 | HT | ASK | SUS | |
■CENTER PIPE (With Canister) | ¥88,000 | HT | ASK | SUS | |
■REAR PIECE MUFFLER (With Silencer) ※Approved Safety Standard in Japan. | ¥180,000 | HT | ASK | SUS | |
■PILLAR TRIM (STAINLESS MIRROR) | 6P ¥30,000 8P ¥35,000 |
G | ASK | SUS | |
■PILLAR TRIM (STAINLESS BLACK) | 6P ¥35,000 8P ¥40,000 |
G | ASK | SUS | |
■PILLAR TRIM (BLACK CARBON) | 6P ¥32,000 8P ¥37,000 |
G | ASK | CARBON | |
FRP: White Gel Coat Finish, necessary to paint / CFRP:Wet Carbon Finish / ABS: Made by ABS Resins、necessary to paint / SUS: Stainless Steel(JIS Formula 304) / CHROME:Hard Adanized Chrome Plated Finish。