SC 430 UZZ40 
FRONT BUMPER
SIDESTEP / FENDERKIT
REAR BUMPER
FENDER KIT
TRUNK SPOILER
INTERIOR PREMIUM EDITION
MUFFLER KIT
- << Back to TOP ｜
- CAR LINEUP >
- LEXUS >
- SC >
- 【SPORTS LINE ARS】SC 430 UZZ40 < MC Before 2005.8-2010.7 >
SC 430 UZZ40 
|
|
| Name of products | EX-factory Price Trading Price |
tob | Term of Delivery |
Material |
 |
■FRONT BUMPER (FOG LAMPS are sold separately.) | ¥110,000 | FT | A S K | FRP |
| 【REF.】※Include Number Plate Holder, FRP Fog Cover for 4 Fog Lamps and Net for Duct(Color: Silver) ※For Installation, may require a little modification or to remove OE. Break Duct and OE. Radiator Duct. ※For Installation, require to modify rear bumper reinforcement parts. ※OE. Optional Dis-Charge Fog Lamps & Daytime Running Lamp and Fender Lamp are impossible to install together with this Front Bumper. ※For avoiding 4 Fog Lamps light on at once, may use the 5 points relay, then able to light on separately each 2 lamps. The vehicle installed Clearance sonar, may require the modification. Reverse side of the Aero Parts, there are the scratched mark, you may cut the holes for Sonar parts. |
|||||
|---|---|---|---|---|---|
 |
■FRONT UNDER SPOILER exclusively for ARSNEW | ¥38,000 | FT | A S K | FRP |
|
【FITTING SIZE】10mm Down ※Adjustable to Back and Forth (70mm-60mm). Regular position is 10mm forwards from Bumper Spoiler 【REF.】※Purchase together with Front Bumper Spoiler, necessary hole has pre-cut. |
|||||
| ■FRONT CAEBON UNDER SPOILER exclusively for ARS | ¥78,000 | GT | A S K | CFRP | |
|
【FITTING SIZE】10mm Down ※Adjustable to Back and Forth (70mm-60mm). Regular position is 10mm forwards from Bumper Spoiler 【REF.】※Purchase together with Front Bumper Spoiler, necessary hole has pre-cut. ※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY（CO6347 BL1500-3K）, using carbon textile as twilled |
|||||
 |
■SIDE STEP / FENDER KIT | ¥180,000 | FT | A S K | FRP |
| 【REF.】※Mesh Net(Color: Silver) included. ※This item is designed to replace with Lexus OE. Side Step. ※Impossible to install with the Genuine optional Mud Guard ※Side Step and Fenders are designed to integrity matching, recommend to purchase together at once. ※Marker lamps installation may require, in case of several countries domestic traffic regulation. (Modify required) |
|||||
 |
■SIDE UNDER SPOILER exclusively for ARS | ¥48,000 | FT | A S K | FRP |
|
【FITTING SIZE】10mm Down ※Adjustable to Back and Forth (30mm-20mm). Regular position is 10mm forwards from Bumper Spoiler 【REF.】※Purchase together with Side Step, necessary hole has pre-cut. |
|||||
| ■SIDE CAEBON UNDER SPOILER exclusively for ARS | ¥96,000 | GT | A S K | CFRP | |
|
【FITTING SIZE】10mm Down ※Adjustable to Back and Forth (30mm-20mm). Regular position is 10mm forwards from Bumper Spoiler 【REF.】※Purchase together with Side Step, necessary hole has pre-cut. ※. Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY（CO6347 BL1500-3K）, using carbon textile as twilled |
|||||
 |
■REAR BUMPER | ¥100,000 | FT | A S K | FRP |
| 【REF.】※Recommend to install together with Muffler Cutter or Exhaust Silencer Kit which designed for Aero Kit. ※Pre-Crash Safety system will not be functioned with this Bumper kit ※Impossible to install with the Genuine optional Mud Guard ※The vehicle installed Clearance sonar, may require the modification. Reverse side of the Aero Parts, there are the scratched mark, you may cut the holes for Sonar parts |
|||||
| ■4P KIT（FRONT BUMPER / SIDE STEP / FENDER / REAR BUMPER） FOG LAMPS are sold separately | ¥375,000 | FT | A S K | FRP | |
| ■5P KIT（FRONT BUMPER / SIDE STEP / FENDER / REAR BUMPER/ TRUNK SPOILER） FOG LAMPS are sold separately | ¥405,000 | FT | A S K | FRP | |
| ■COMPLETE KIT | ¥640,000 | FT | A S K | ||
| FRONT BUMPER / SIDE STEP / FENDER / REAR BUMPER / TRUNK SPOILER / MUFFLER KIT / FRP FOG COVER /
4 FOG LAMPS (2Lamps in 1set×2) / 5 POINTS SWITCHING RELAY / COMPLETE PLATE / LOGO EMBLEM
|
|||||
 |
■FENDER KIT | ¥100,000 | FT | A S K | FRP |
| 【REF.】※Kit Includes Mesh Net(Color: Silver) ※Emblem/ARTISAN SPIRITS Logo Plate are separated to sell.
※Marker lamps installation may require, in case of several countries domestic traffic regulation. (Modify required)  |
|||||
  |
■BONNET HOOD | ¥120,000 | FT | Out of production | FRP |
|
【REF.】Replace with OE Parts ※Kit include Mesh Net (Color: Silver)/ Outer Duct Cover/ Inner Duct Cover |
|||||
| ■CARBON BONNET HOOD | ¥140,000 | GT | Out of production | CFRP | |
|
【REF.】※Replace with OE Parts ※Kit include Mesh Net (Color: Silver)/ CFRP Outer Duct Cover/ Inner Duct Cover ※Carbon Outer Duct Cover Version ※Carbon Product's finish is not in finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY（CO6347 BL1500-3K）, using carbon textile as twilled |
|||||
 |
■TRUNK SPOILER | ¥42,000 | FT | A S K | FRP |
 |
■DUAL WING | ¥84,000 | FT | A S K | FRP |
| ■CARBON DUAL WING | ¥168,000 | GT | A S K | CFRP | |
|
【REF.】※May require the additional 2 installation holes on the trunk hood. ※Carbon Product's finish is not in finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY（CO6347 BL1500-3K）, using carbon textile as twilled |
|||||
  |
■REGISTRATION PLATE HOLDER | ¥24,000 | J | - | CFRP |
|
【REF.】※Include Artisan Spirits BLACK LABEL Plate. ※Impossible install with illuminated number plate. ※Please specify from Twill Weave or Plain Weave. ※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once fitting . Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY（CO6347 BL1500-3K） |
|||||
 |
■NUMBER PLATE BOLT SET (Color: Silver) | ¥2,000 | H | - | SUS |
| ■NUMBER PLATE BOLT SET (Color: Matt Black) | ¥2,400 | H | - | SUS | |
|
【REF.】BOLT: M6 P1.0X25mm/Set with one Torx wrench |
|||||
 |
■FOG LAMP (2 Lamps in 1 set) | ¥10,000 | G | 1W | |
| 【REF.】Set with 2 Fog Lamps (87,5mm diameter/H3/12V), Circuit Relayx1, SwitchX1, Standard wiring LED kit
※Fog lamp stay shaped Specialized for ARTISAN SPIRITS item. |
|||||
 |
■5 POINTS SWITCHING RELAY (DC12V only) | ¥1,250 | F | ASK | |
|
【REF.】May use as 4 Fog Lamps at once to 2 Lamps each. (May select 2 patterns like contact on or contact off)
※Japanese domestic rules prohibited 4 Fog Lamps light on at once |
|||||
 |
■FRONT PIPE (Without Canister) ※For Competition Use | ¥120,000 | H | ASK | SUS |
|
【REF.】※May install each Center Pipe only or Front Pipe only ※Circuit use only
|
|||||
 |
■FRONT PIPE (With Canister) ※Approved Safety Standard in Japan. | ¥170,000 | H | ASK | SUS |
|
【REF.】※May install each Center Pipe only or Front Pipe only
|
|||||
 |
■CENTER PIPE (Without Canister) ※Approved Safety Standard in Japan. | ¥118,000 | H | ASK | SUS |
|
【REF.】※May install each Center Pipe only or Front Pipe only
|
|||||
 |
■REAR PIECE MUFFLER (Single Exhaust end on each side. With Silencer) | ¥226,000 | H | ASK | SUS |
|
【SIZE】160×102×2
【REF.】AR-W160 Muffler Cutter Style. With Authentication Plate. ※Exclusive Design for ARS, recommend to install with Aero Parts at once. ※Approved Safety Standard in Japan. ※Able to purchase Muffler Cutter only |
|||||
 |
■FLOOR MAT（HIGH CLASS） | ¥45,000 | H | ASK | |
| 【COLOR】Black, Ivory
【REF.】Density:1700g/m² pile Length: 17mm ※Approved inflammable regulation for Vehicle ※High Class products is set by multiple layer color |
|||||
|
■FLOOR MAT（MIDDLE CLASS） | ¥40,000 | H | ASK | |
| 【COLOR】Black, Gray, Ivory
【REF.】Density:1400g/m² pile Length: 13mm ※Approved inflammable regulation for Vehicle |
|||||
|
■FLOOR MAT（REGULAR CLASS） | ¥30,000 | H | ASK | |
| 【COLOR】 Black, Gray, Ivory
【REF.】Density:740g/m² pile Length: 10mm ※Approved inflammable regulation for Vehicle |
|||||
FRP: White Gel Coat Finish, necessary to paint / CFRP:Wet Carbon Finish / ABS: Made by ABS Resins、necessary to paint / SUS: Stainless Steel（JIS Formula 304） / CHROME:Hard Adanized Chrome Plated Finish