LS 600h/600hL/460/460L USF/UVF 4# 
FRONT HALF SPOILER
SIDE STEP
REAR HALF SPOILER
FENDER KIT
SPORTS FENDER KIT
BONNET HOOD
BONNET HOOD
TRUNK SPOILER
REAR ROOF SPOILER
LED WINKER MIRROR
PILLAR TRIM
FLOOR MAT
- << Back to TOP ｜
- CAR LINEUP >
- LEXUS >
- LS >
- 【HIGH-SPEC LINE】LS 600h/600hL/460/460L USF/UVF 4# < MC Before 2006.9-2009.11 >
|
|
LS 600h/600hL/460/460L USF/UVF 4# 
| Name of products | EX-factory Price Trading Price |
tob | Term of Delivery |
Material |
|
■FRONT HALF SPOILER | ¥48,000 | FT | Out of production | FRP |
 |
■SIDE STEP | ¥80,000 | FT | A S K | FRP |
|
【REF.】※When you placed the order, necessary to specify Long wheel base or Standard wheel base ※Long Wheelbase version is necessary to add 4,000Yen. |
|||||
|---|---|---|---|---|---|
 |
■REAR HALF SPOILER | ¥50,000 | FT | A S K | FRP |
 |
■FENDER KIT | ¥125,000 | FT | A S K | FRP |
|
【REF.】※Kit Includes Mesh Net(Color: Silver)/FRP Fender Fin
※Marker lamps installation may require in case of several countries’ domestic traffic regulation. (Modify required)  |
|||||
| ■CARBON FENDER KIT | ¥155,000 | FT | A S K | CFRP | |
|
【REF.】※Kit Includes Mesh Net(Color: Silver)/Carbon Fender Fin
※Marker lamps installation may require in case of several countries’ domestic traffic regulation. (Modify required) ※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY（CO6347 BL1500-3K）, using carbon textile as twilled |
|||||
 |
■SPORTS FENDER KIT | ¥125,000 | FT | A S K | FRP |
|
【REF.】※Kit Includes Mesh Net(Silver color)/ Artisan Spirit Logo Plate.
|
|||||
  |
■BONNET HOOD | ¥145,000 | FT | Out of production | FRP |
|
【REF.】※Kit include Mesh Net (Color: Silver)/FRP Fin/FRP Outer Duct Cover/FRP Inner Duct Cover
|
|||||
| ■CARBON BONNET HOOD | ¥185,000 | FT | Out of production | CFRP | |
|
【REF.】※Kit include Mesh Net (Color: Silver)/CFRP Fin/CFRP Outer Duct Cover/CFRP Inner Duct Cover
※Carbon Outer Duct Cover and Carbon Fender Fin Version ※Carbon Product's finish is not in finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY（CO6347 BL1500-3K）, using carbon textile as twilled |
|||||
 |
■TRUNK SPOILER | ¥42,000 | FT | A S K | FRP |
| ■CARBON TRUNK SPOILER | ¥84,000 | H | A S K | CFRP | |
|
【REF.】※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV.
Carbon material made by TORAY（CO6347 BL1500-3K）, using carbon textile as twilled
|
|||||
 |
■REAR ROOF SPOILER | ¥42,000 | FT | A S K | FRP |
| ■CARBON REAR ROOF SPOILER | ¥84,000 | H | A S K | CFRP | |
|
【REF.】※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV.
Carbon material made by TORAY（CO6347 BL1500-3K）, using carbon textile as twilled. |
|||||
  |
■REGISTRATION PLATE HOLDER | ¥24,000 | J | - | CFRP |
|
【REF.】※Include Artisan Spirits BLACK LABEL Plate. ※Impossible to install with illuminated number plate. ※Please specify from Twill Weave or Plain Weave. ※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY（CO6347 BL1500-3K） |
|||||
 |
■NUMBER PLATE BOLT SET (Color: Silver) | ¥2,000 | H | - | SUS |
| ■NUMBER PLATE BOLT SET(Color: Matt Black) | ¥2,400 | H | - | SUS | |
|
【REF.】BOLT: M6 P1.0X25mm/Set with one Torx wrench |
|||||
 |
■CARBON SCUFF PLATE | ¥48,000 | H | A S K | CFRP |
|
【REF.】※Long Wheel Base Version is not available. ※Kit includes Artisan Spirits Plate x 4 with double sided adhesive tape. ※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY（CO6347 BL1500-3K）, using carbon textile as twilled. |
|||||
 |
■FRONT PIPE (Without Canister) ※For Competition Use | ¥118,000 | HT | ASK | SUS |
|
【REF.】※Front exhaust pipe and Center pipe are the related item, so that have to purchase as a set.
※Not adapted with the regulation of noise control during acceleration with Vehicles produced after 2011.04.01 |
|||||
 |
■FRONT PIPE (With Canister) ※Approved Safety Standard in Japan | ¥230,000 | HT | ASK | SUS |
|
【REF.】※Front exhaust pipe and Center pipe are the related item, so that have to purchase as a set.
※Not adapted with the regulation of noise control during acceleration with Vehicles produced after 2011.04.01 |
|||||
 |
■CENTER PIPE (With Canister) ※Approved Safety Standard in Japan | ¥136,000 | HT | ASK | SUS |
|
【REF.】※Front exhaust pipe and Center pipe are the related item, so that have to purchase as a set.
※Not adapted with the regulation of noise control during acceleration with Vehicles produced after 2011.04.01 |
|||||
 |
■REAR PIECE MUFFLER (With Silencer) ※Approved Safety Standard in Japan. | ¥145,000 | HT | ASK | SUS |
|
【REF.】Fit to genuine bumper/genuine muffler cutter.
|
|||||
 |
■PILLAR TRIM （STAINLESS MIRROR） | 6P ¥30,000 8P ¥35,000 |
G | ASK | SUS |
|
【REF.】6 pieces/8 pieces, with installation manual and double sided adhesive tape.
Not fit with the vehicle installed Door visor, (May require some modification) |
|||||
 |
■PILLAR TRIM （STAINLESS BLACK） | 6P ¥35,000 8P ¥40,000 |
G | ASK | SUS |
|
【REF.】6 pieces/8 pieces, with installation manual and double sided adhesive tape.
Not fit with the vehicle installed Door visor, (May require some modification) |
|||||
 |
■PILLAR TRIM （BLACK CARBON） | 6P ¥32,000 8P ¥37,000 |
G | ASK | CARBON |
|
【REF.】6 pieces/8 pieces, with installation manual and double sided adhesive tape.
Not fit with the vehicle installed Door visor, (May require some modification) |
|||||
 |
■FLOOR MAT（HIGH CLASS） | ¥45,000 | H | ASK | |
|
【COLOR】 Black, Ivory
【REF.】Density: 1700g/m² pile Length: 17mm ※Approved inflammable regulation for Vehicle. ※Long Wheel Base Version is not available. ※High Class products is set by multiple layer color |
|||||
|
■FLOOR MAT（MIDDLE CLASS） | ¥40,000 | H | ASK | |
|
【COLOR】Black, Gray, Ivory
【REF.】Density: 1400g/m² pile Length: 13mm ※Approved inflammable regulation for Vehicle ※Long Wheel Base Version is not available. |
|||||
|
■FLOOR MAT（REGULAR CLASS） | ¥30,000 | H | ASK | |
|
【COLOR】Black, Gray, Ivory
【REF.】Density: 740g/m² pile Length: 10mm ※Approved inflammable regulation for Vehicle ※Long Wheel Base Version is not available. |
|||||
FRP: White Gel Coat Finish, necessary to paint / CFRP:Wet Carbon Finish / ABS: Made by ABS Resins、necessary to paint / SUS: Stainless Steel（JIS Formula 304） / CHROME:Hard Adanized Chrome Plated Finish