AIM

RX 450h/350/270 GYL 1#W < MC Before 2009.1-2011.12 >



  • FRONT BUMPER


  • FRONT BUMPER


  • SIDE STEP


  • REAR BUMPER


  • REAR BUMPER


  • OVER FENDER


  • REAR GATE


  • FRONT GRILLE


  • FRONT GRILLE


  • REAR PIECE MUFFLER


  • PILLAR TRIM


  • FLOOR MAT


  • LEDLIGHT








左へ
右へ

RX 450h/350/270 GYL 1#W < MC Before 2009.1-2011.12 >

Name of products   EX-factory Price
Trading Price
tob Term of
Delivery
Material
■FRONT BUMPER(Include LED LIGHT 220) ¥148,000 F 2W〜4W FRP
【FITTING SIZE】35mm DOWN
【REF.】※Include LED LIGHT 220, Number Plate Holder and Mesh Net for Duct(Color: Silver)
The vehicle installed Clearance sonar, may require the modification. Reverse side of the Aero Parts, there are the scratched mark, you may cut the holes for Sonar parts.
※When install this Aero bumper to 350/270, you may require the following Lexus OE parts for 450h(Radiator Grill:No53101-48271/SEAL HOOD:NO53395-48040)
※For Installation, may require a little modification or to remove OE. Break Duct and OE. Radiator Duct.
※OE optional Discharged Fog Lamps & daytime Running Lamps have to transfer
■SIDE STEP(6P) ¥90,000 F 2W〜4W FRP
【FITTING SIZE】FRONT:20mm DOWN、REAR:15mm DOWN
【REF.】※Covered on OEM Side Step
■REAR BUMPER ¥125,000 F 2W〜4W FRP
【FITTING SIZE】15mm DOWN
【REF.】※Pre-Crash Safety system will not be functioned with this Bumper kit
※The vehicle installed Clearance sonar, may require the modification. Reverse side of the Aero Parts, there are the scratched mark, you may cut the holes for Sonar parts
※Impossible to install with the Genuine optional Mud Guard
■3P KIT(FRONT BUMPER SPOILER / SIDE STEP / REAR BUMPER SPOILER) ¥348,000 F 2W〜4W FRP
■OVER FENDER KIT(10P) ¥120,000 F 2W〜4W FRP
【FITTING SIZE】20mm WIDE
【REF.】※Carbon Hybrid Type (CFRP+FRP) is also available.
※Exclusive Design for Artisan Spirits Aero kit, when install to OE bumper, may require the modification.。
※Installed this item, Vehicle become 20mm wider than OE, please check your country’s local regulation
※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY(CO6347 BL1500-3K), using carbon textile as twilled
■REAR GATE SPOILER ¥48,000 F 2W〜4W FRP
【REF.】※Carbon Hybrid Type (CFRP+FRP) is also available.
※Include Logo Emblem.
※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY(CO6347 BL1500-3K), using carbon textile as twilled
※In case of the vehicle under grass coating or similar paint coating on, sometimes user has to remove the surface of painting by compound for increasing the strength of bonding.

■REGISTRATION PLATE HOLDER ¥24,000 H - CFRP
【REF.】※Include BLACK LABEL Plate. ※Impossible install with illuminated number plate. ※Please specify from Twill Weave or Plain Weave.
※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY(CO6347 BL1500-3K)
■NUMBER PLATE BOLT SET (Color: Silver) ¥2,000 H - SUS
■NUMBER PLATE BOLT SET (Color: Matt Black) ¥2,400 H - SUS
【REF.】BOLT: M6 P1.0X25mm/Set with one Torx wrench
■FRONT GRILLE (With Lexus Mark attachment base) ¥48,000 G 1W〜2W FRP
【REF.】※Exclusive for 450h (Please inquire us when you would like to install 350 and 270)
※Lexus Mark requires to replace from OE front Grill.
※Replacement with Inner Grill. Impossible to install the vehicle with Millimeter Wave Rader System.
■FRONT GRILLE (Without Lexus Mark attachment base) ¥48,000 G 1W〜2W FRP
【REF.】※Exclusive for 450h (Please inquire us when you would like to install 350 and 270)
※Replacement with Inner Grill. Impossible to install the vehicle with Millimeter Wave Rader System.
■REAR PIECE MUFFLER (Dual Exhaust end on each side with Silencer) ¥165,000 G ASK SUS
【SIZE】120φ×80φ
【REF.】Fit to genuine bumper. Fit to VERSE bumper. Use ZO-W120.
□ Slide Function Exhaust Outlet may require additional 14,000Yen ※Approved Safety Standard in Japan.

■REAR PIECE MUFFLER (Dual Exhaust end on one side with Silencer) ¥95,000 G ASK SUS
【SIZE】120φ×80φ
【REF.】Fit to genuine bumper. Fit to VERSE bumper. Use ZO-W120.
□ Slide Function Exhaust Outlet may require additional 7,000Yen ※Approved Safety Standard in Japan.

■OZ Racing × ARTISAN BOTTICELLI Ⅲ MattBlack LIMITED( 8.5 × 20) ¥238,000 F ASK  
■OZ Racing × ARTISAN BOTTICELLI Ⅲ MattBlack LIMITED(9 × 22) ¥279,000 F ASK  
【REF.】※Adaptive with Big caliper Brake ※Inner Lim and Outer Lim are painted by Matt Black( Special Color). 
※Include ARTSAN SPIRIT Center Hub Cap
■LED LIGHT 220 ¥14,000 G ASK  
【REF.】220mm long/ Straight LINED 5 LED, High Brightness, High Efficiency
※For installation, may require minor modification.
■PILLAR TRIM (STAINLESS MIRROR) 8P ¥35,000
10P ¥40,000
E ASK SUS
【REF.】8 pieces/10 pieces, with installation manual and double sided adhesive tape.
Not fit with the vehicle installed Door visor, (May require some modification)
■PILLAR TRIM (STAINLESS BLACK) 8P ¥40,000
10P ¥45,000
E ASK SUS
【REF.】8 pieces/10 pieces, with installation manual and double sided adhesive tape.
Not fit with the vehicle installed Door visor, (May require some modification)
■PILLAR TRIM (BLACK CARBON) 8P ¥37,000
10P ¥42,000
E 1W CFRP
【REF.】8 pieces/10 pieces, with installation manual and double sided adhesive tape.
Not fit with the vehicle installed Door visor, (May require some modification)
■FLOOR MAT(HIGH CLASS) ¥45,000 H 2W  
【COLOR】Black, Ivory
【REF.】Density: 1700g/m² pile Length: 17mm  ※Approved inflammable regulation for Vehicle 
※High Class products is set by multiple layer color
■FLOOR MAT(MIDDLE CLASS) ¥40,000 H 2W  
【COLOR】Black, Gray, Ivory
【REF.】Density: 1400g/m² pile Length: 13mm  ※Approved inflammable regulation for Vehicle
■FLOOR MAT(REGULAR CLASS) ¥30,000 H 2W  
【COLOR】Black, Gray, Ivory
【REF.】Density: 740g/m² pile Length: 10mm  ※Approved inflammable regulation for Vehicle
■SWAROVSKI SEAT BELT CANCELLER KEY RING ¥10,000 H ASK  
【SLOT SIZE】Width 20mm, Thickness 3mm
【REF.】※Uses Genuine Swarovski Cristal ※With Artisan Spirits Logo Mark
※This Product is for cancellation of seat belt warning buzzer or lamps during load the parcels, pet animal or the person who exempted to belt on regally. Then, if the seat belt not smoothed into slots, don’t forced to stick in, it will give the complete damage to the seat belt. We will not take any responsibility which arising the accidents and the damages during use this item.
FRP: White Gel Coat Finish, necessary to paint / CFRP:Wet Carbon Finish / ABS: Made by ABS Resins、necessary to paint / SUS: Stainless Steel(JIS Formula 304) / CHROME:Hard Adanized Chrome Plated Finish