AIM

LS 600h/600hL USF/UVF 4# < MC Middle 2009.11-2012.9 >





  • FRONT BUMPER


  • LIP SPOILER


  • SIDE STEP


  • REAR BUMPER


  • FENDER KIT


  • SPORTS FENDER KIT


  • BONNET HOOD


  • BONNET HOOD


  • TRUNK SPOILER


  • CARBON TRUNK SPOILER


  • REAR ROOF SPOILER


  • CARBON REAR ROOF SPOILER


  • PILLAR TRIM


  • FLOOR MAT


  • LED LIGHT












左へ
右へ

LS 600h/600hL USF/UVF 4# < MC Middle 2009.11-2012.9 >

||
Name of products   EX-factory Price
Trading Price
tob Term of
Delivery
Material
■FRONT BUMPER(Include LED LIGHT 160) FOG LAMPS are sold separately. ¥148,000 F 2W〜4W FRP
【FITTING SIZE】15mm DOWN
【REF.】※Include LED LIGHT 160, Number Plate Holder, FRP Fog Cover for 4 Fog Lamps and Net for Duct(Color: Silver)
※For Installation, may require a little modification or to remove OE. Break Duct and OE. Radiator Duct.
※OE. Optional Dis-Charge Fog Lamps & Daytime Running Lamp and Fender Lamp are unable to install together with this Front Bumper.
※For avoiding 4 Fog Lamps light on at once, may use the 5 points relay, then able to light on separately each 2 lamps.
※When install this Aero bumper to 460/460h, you may require the following Lexus OE parts for 600h(Radiator Grill:No53100-50906/Radiator Grill Garnish:No53141-48060-79/Radiator Protector:No53119-50070)
※The vehicle installed Clearance sonar, may require the modification. Reverse side of the Aero Parts, there are the scratched marks on, you may cut the holes for Sonar parts.
■FRONT LIP SPOILER exclusively for VERSE Model ¥45,000 F 2W〜4W FRP
【FITTING SIZE】10mm DOWN
■FRONT CAEBON LIP SPOILER exclusively for VERSE Model ¥90,000 G 2W〜4W CFRP
【FITTING SIZE】10mm DOWN
【REF.】※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY(CO6347 BL1500-3K), using carbon textile as twilled
■SIDE STEP ¥80,000 F 2W〜4W FRP
【FITTING SIZE】15mm DOWN
【REF.】※When you placed the order, necessary to specify Long wheel base or Standard wheel base
※Covered on OEM Side Step
※Long Wheelbase version is necessary to add 4,000Yen.
※Unable to install with the Genuine optional Mud Guard
※Unable to install SZ Version Lexus LS
■REAR BUMPER ¥125,000 F 2W〜4W FRP
【FITTING SIZE】15mm DOWN
【REF.】※Mesh Net(Silver Color ) included
※Pre-Crash Safety system will not be functioned with this Bumper kit
※Impossible to install with the Genuine optional Mud Guard
The vehicle installed Clearance sonar, may require the modification. Reverse side of the Aero Parts, there are the scratched marks, you may cut the holes for Sonar parts
■3P KIT(FRONT BUMPER / SIDE STEP / REAR BUMPER / LED LIGHT 160 / FRP FOG COVER)FOG LAMPS are sold separately ¥338,000 F 2W〜4W FRP
【REF.】※When you placed the order, necessary to specify Long wheel base or Standard wheel base
■4P KIT(FRONT BUMPER / SIDE STEP / REAR BUMPER / LED LIGHT 160 / FRP FOG COVER / TRUNK SPOILER)FOG LAMPS are sold separately ¥368,000 F 2W〜4W FRP
【REF.】※When you placed the order, necessary to specify Long wheel base or Standard wheel base
■5P KIT(FRONT BUMPER / SIDE STEP / REAR BUMPER / LED LIGHT 160 / FRP FOG COVER / TRUNK SPOILER / REAR ROOF)FOG LAMPS are sold separately ¥388,000 F 2W〜4W FRP
【REF.】※When you placed the order, necessary to specify Long wheel base or Standard wheel base
■FENDER KIT ¥125,000 F 2W〜4W FRP
【REF.】※Kit Includes Mesh Net(Silver color)/FRP Fender Fin
■CARBON FENDER KIT ¥155,000 F 2W〜4W CFRP
【REF.】※Kit Includes Mesh Net(Silver color)/Carbon Fender Fin
※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY(CO6347 BL1500-3K), using carbon textile as twilled
■SPORTS FENDER KIT NEW ¥125,000 F 2W〜4W FRP
【REF.】※Kit Includes Mesh Net(Silver color)/ Artisan Spirit Logo Plate.
■CARBON SPORTS FENDER KIT NEW ¥155,000 F 2W〜4W CFRP
【REF.】※Kit Includes Mesh Net(Silver color)/ Artisan Spirit Logo Plate.
※Carbon Outer Duct version (CFRP)
※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY(CO6347 BL1500-3K), using carbon textile as twilled

■BONNET HOOD NEW ¥145,000 F 2W〜4W FRP
【REF.】※Kit include Mesh Net (Color: Silver)/FRP Fin/FRP Outer Duct Cover/FRP Inner Duct Cover
■CARBON BONNET HOOD NEW ¥185,000 F 2W〜4W CFRP
【REF.】※Kit include Mesh Net (Color: Silver)/CFRP Fin/CFRP Outer Duct Cover/CFRP Inner Duct Cover
※Carbon Outer Duct Cover and Carbon Fender Fin Version
※Carbon Product's finish is not in finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY(CO6347 BL1500-3K), using carbon textile as twilled
■TRUNK SPOILER ¥42,000 F 2W〜4W FRP
■CARBON TRUNK SPOILER ¥84,000 G 2W〜4W CFRP
【REF.】※Carbon Product's finish is not in finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY(CO6347 BL1500-3K), using carbon textile as twilled.
■REAR ROOF SPOILER ¥42,000 F 2W〜4W FRP
■CARBON REAR ROOF SPOILER ¥84,000 G 2W〜4W CFRP
【REF.】※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY(CO6347 BL1500-3K), using carbon textile as twilled.

■REGISTRATION PLATE HOLDER ¥24,000 H - CFRP
【REF.】※Include Artisan Spirits BLACK LABEL Plate.
※Impossible to install with illuminated number plate.
※Please specify from Twill Weave or Plain Weave.
※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY(CO6347 BL1500-3K)
■NUMBER PLATE BOLT SET (Color: Silver) ¥2,000 H - SUS
■NUMBER PLATE BOLT SET(Color: Matt Black) ¥2,400 H - SUS
【REF.】BOLT: M6 P1.0X25mm/Set with one Torx wrench
■CARBON SCUFF PLATE NEW ¥48,000 G 3W CFRP
【REF.】※Long Wheel Base Version is not available.
※Kit includes Artisan Spirits Plate x 4 with double sided adhesive tape.
※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY(CO6347 BL1500-3K), using carbon textile as twilled.
■OZ Racing × ARTISAN BOTTICELLI Ⅲ MattBlack LIMITED(9 × 22 31) ¥279,000 F ASK  
■OZ Racing × ARTISAN BOTTICELLI Ⅲ MattBlack LIMITED(10 × 22 40) ¥289,000 F ASK  
【REF.】※Adaptive with Big caliper Brake 
※Inner Lim and Outer Lim are painted by Matt Black( Special Color).  
※Include ARTSAN SPIRIT Center Hub Cap
■LOCK NUT (Bolt Hole Pitch 15.7mm only) ¥9,000 G ASK  
【REF.】4 Special Lock Nut in one Set
■FOG LAMP (2 Lamps in 1 set) ¥10,000 G 1W〜2W  
【REF.】Set with 2 Fog Lamps (87,5mm diameter/H3/12V), Circuit Relayx1, SwitchX1, Standard wiring LED kit
※Fog lamp stay shaped Specialized for ARTISAN SPIRITS item.
■LED LIGHT 160 ¥13,400 G ASK  
【REF.】160mm long/ Straight LINED 5 LED, High Brightness, High Efficiency
※For installation, may require minor modification.
■LED VALVE (2Bulbs in 1 Set) ¥20,000 H ASK  
【REF.】For Sirius Fog Lamp only. 3LED for each dimension.
■5 POINTS SWITCHING RELAY (DC12V only) ¥1,250 F ASK  
【REF.】May use as 4 Fog Lamps at once to 2 Lamps each. (May select 2 patterns like contact on or contact off)
※Japanese domestic rules prohibited 4 Fog Lamps light on at once
■FRONT PIPE (Without Canister) ※For Competition Use ¥74,000 G ASK SUS
【REF.】※Front exhaust pipe and Center pipe are the related item, so that have to purchase as a set.
※Not adapted with the regulation of noise control during acceleration with Vehicles produced after 2011.04.01

■FRONT PIPE (With Canister) ※Approved Safety Standard in Japan ¥200,000 G ASK SUS
【REF.】※Front exhaust pipe and Center pipe are the related item, so that have to purchase as a set.
※Not adapted with the regulation of noise control during acceleration with Vehicles produced after 2011.04.01

■CENTER PIPE (With Canister) ※Approved Safety Standard in Japan ¥126,000 G ASK SUS
【REF.】※Front exhaust pipe and Center pipe are the related item, so that have to purchase as a set.
※Not adapted with the regulation of noise control during acceleration with Vehicles produced after 2011.04.01

■REAR PIECE MUFFLER (With Silencer) ※Approved Safety Standard in Japan. ¥135,000 G ASK SUS
【REF.】Fit to genuine bumper/genuine muffler cutter.

■PILLAR TRIM (STAINLESS MIRROR) 6P ¥30,000
8P ¥35,000
E 1W SUS
【REF.】6 pieces/8 pieces, with installation manual and double sided adhesive tape.
Not fit with the vehicle installed Door visor, (May require some modification)
■PILLAR TRIM (STAINLESS BLACK) 6P ¥35,000
8P ¥40,000
E 1W SUS
【REF.】6 pieces/8 pieces, with installation manual and double sided adhesive tape.
Not fit with the vehicle installed Door visor, (May require some modification)
■PILLAR TRIM (BLACK CARBON) 6P ¥32,000
8P ¥37,000
E 1W CARBON
【REF.】6 pieces/8 pieces, with installation manual and double sided adhesive tape.
Not fit with the vehicle installed Door visor, (May require some modification)
■FLOOR MAT(HIGH CLASS) ¥45,000 H 2W  
【COLOR】 Black, Ivory
【REF.】Density: 1700g/m² pile Length: 17mm 
※Approved inflammable regulation for Vehicle. 
※Long Wheel Base Version is not available. 
※High Class products is set by multiple layer color
■FLOOR MAT(MIDDLE CLASS) ¥40,000 H 2W  
【COLOR】Black, Gray, Ivory
【REF.】Density: 1400g/m² pile Length: 13mm 
※Approved inflammable regulation for Vehicle 
※Long Wheel Base Version is not available.
■FLOOR MAT(REGULAR CLASS) ¥30,000 H 2W  
【COLOR】Black, Gray, Ivory
【REF.】Density: 740g/m² pile Length: 10mm 
※Approved inflammable regulation for Vehicle 
※Long Wheel Base Version is not available.
■SWAROVSKI SEAT BELT CANCELLER KEY RING ¥10,000 H ASK  
【SLOT SIZE】Width 20mm, Thickness 3mm
【REF.】※Uses Genuine Swarovski Cristal ※With Artisan Spirits Logo Mark
※This Product is for cancellation of seat belt warning buzzer or lamps during load the parcels, pet animal or the person who exempted to belt on regally. Then, if the seat belt not smoothed into slots, don’t forced to stick in, it will give the complete damage to the seat belt. We will not take any responsibility which arising the accidents and the damages during use this item.
FRP: White Gel Coat Finish, necessary to paint / CFRP:Wet Carbon Finish / ABS: Made by ABS Resins、necessary to paint / SUS: Stainless Steel(JIS Formula 304) / CHROME:Hard Adanized Chrome Plated Finish