AIM

CT 200h DAA-ZWA10 < 2011.1- 2013.12 >



  • FRONT HALF SPOILER


  • REAR HALF SPOILER


  • SIDE STEP


  • REAR GATE SPOILER


  • CARBON REAR GATE SPOILER


  • REAR PIECE MUFFLER
    Dual Exhaust end on each side.


  • REAR PIECE MUFFLER
    Dual Exhaust end on one side.


  • PILLAR TRIM


  • PILLAR TRIM


  • FLOOR MAT














左へ
右へ

CT 200h DAA-ZWA10 < 2011.1-2013.12 >

Name of products   EX-factory Price
Trading Price
tob Term of
Delivery
Material
■FRONT HALF SPOILER ¥46,000 F 2W〜4W FRP
【FITTING SIZE】20mm DOWN
【REF.】※Not applicable with Aero Bumper.
■SIDE STEP ¥48,000 F 2W〜4W FRP
【FITTING SIZE】FRONT:10mm DOWN REAR:15mm DOWN
【REF.】※Covered on OE Side Step
■REAR HALF SPOILER ¥46,000 F 2W〜4W FRP
【FITTING SIZE】15mm DOWN
【REF.】※Not applicable with Aero Bumper. ※Unable to install with the Genuine optional Mud Guard.
※For Dual Muffler, May select from one side opening or both side opening/230mm opening
■REAR GATE SPOILER ¥38,000 F 2W〜4W FRP
【REF.】※In case of the vehicle under grass coating or similar paint coating on, sometimes user has to remove the surface of painting by compound for increasing the strength of bonding.
■CARBON REAR GATE SPOILER ¥76,000 G 2W〜4W CFRP
【REF.】※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV.Carbon material made by TORAY(CO6347 BL1500-3K), using carbon textile as twilled
※In case of the vehicle under grass coating or similar paint coating on, sometimes user has to remove the surface of painting by compound for increasing the strength of bonding.
■3P KIT(FRONT HALF SPOILER / SIDE STEP / REAR HALF SPOILER) ¥130,000 F 2W〜4W FRP
■4P KIT(FRONT HALF SPOILER / SIDE STEP / REAR HALF SPOILER / REAR GATE SPOILER) ¥160,000 F 2W〜4W FRP
■REAR PIECE MUFFLER(Dual Exhaust end on each side.) ¥155,000 G ASK SUS
【SIZE】95φ×70φ
【REF.】Adaptable for Vehicle registration Code (Japan), Applicable with OE Bumper, Applicable with Sports Line. Includes Authentication Plate
※Center Pipe and Rear Piece Muffler in one construction.  □ Slide Function Exhaust Outlet may require additional 14,000Yen

■REAR PIECE MUFFLER(Dual Exhaust end on one side.) ¥136,000 G ASK SUS
【SIZE】95φ×70φ
【REF.】Adaptable for Vehicle registration Code (Japan), Applicable with OE Bumper, Applicable with Sports Line. Includes Authentication Plate.
※Center Pipe and Rear Piece Muffler in one construction. □ Slide Function Exhaust Outlet may require additional 7,000Yen


■REGISTRATION PLATE HOLDER ¥24,000 H - CFRP
【REF.】※Include Artisan Spirits BLACK LABEL Plate. ※Impossible to install with illuminated number plate.
※Please specify from Twill Weave or Plain Weave.
※Carbon Product's finish is not finalized step cause of Pre-Install fitting is required, we recommend to check once the fitting. Then be sure to finalize by Clear Coating finish, for its Protection from UV. Carbon material made by TORAY(CO6347 BL1500-3K)
■NUMBER PLATE BOLT SET (Color: Silver) ¥2,000 H - SUS
■NUMBER PLATE BOLT SET (Color: Matt Black) ¥2,400 H - SUS
【REF.】BOLT: M6 P1.0X25mm/Set with one Torx wrench
■OZ Racing × ARTISAN BOTTICELLI Ⅲ MattBlack LIMITED(8 × 19 35) ¥215,000 F ASK  
【REF.】※Adaptive with Big caliper Brake ※Inner Lim and Outer Lim are painted by Matt Black( Special Color).
※Include ARTSAN SPIRIT Center Hub Cap
■PILLAR TRIM (STAINLESS MIRROR) ¥30,000 E ASK SUS
【REF.】6 pieces with installation manual and double sided adhesive tape.
※Not fit with the vehicle installed Door visor, (May require some modification)
■PILLAR TRIM (STAINLESS BLACK) ¥35,000 E ASK SUS
【REF.】6 pieces with installation manual and double sided adhesive tape.
※Not fit with the vehicle installed Door visor, (May require some modification)
■PILLAR TRIM (BLACK CARBON) ¥32,000 E 1W CFRP
【REF.】6 pieces with installation manual and double sided adhesive tape.
※Not fit with the vehicle installed Door visor, (May require some modification)
■FLOOR MAT(HIGH CLASS) ¥45,000 H 2W  
【COLOR】Black, Ivory
【REF.】Density: 1700g/m² pile Length: 17mm  ※Approved inflammable regulation for Vehicle. 
※High Class products is set by multiple layer color
■FLOOR MAT(MIDDLE CLASS) ¥40,000 H 2W  
【COLOR】Black, Gray, Ivory
【REF.】Density: 1400g/m² pile Length: 13mm  ※Approved inflammable regulation for Vehicle.
■FLOOR MAT(REGULAR CLASS) ¥30,000 H 2W  
【COLOR】Black, Gray, Ivory
【REF.】Density: 740g/m² pile Length: 10mm  ※Approved inflammable regulation for Vehicle.
■SWAROVSKI SEAT BELT CANCELLER KEY RING ¥10,000 H ASK  
【SIZE】Width 20mm, Thickness 3mm
【REF.】※Uses Genuine Swarovski Cristal ※With Artisan Spirits Logo Mark
※This Product is for cancellation of seat belt warning buzzer or lamps during load the parcels, pet animal or the person who exempted to belt on regally. Then, if the seat belt not smoothed into slots, don’t forced to stick in, it will give the complete damage to the seat belt. We will not take any responsibility which arising the accidents and the damages during use this item.
FRP: White Gel Coat Finish, necessary to paint / CFRP:Wet Carbon Finish / ABS: Made by ABS Resins、necessary to paint / SUS: Stainless Steel(JIS Formula 304) / CHROME:Hard Adanized Chrome Plated Finish